RECHARGEABLE BATTERY SYSTEM FOR SMALL SCALE ELECTRIC VEHICLE
DOI:
https://doi.org/10.11113/jtse.v8.172Keywords:
Lithium-ion battery; voltage sensor; cylindrical battery cell; thermocoupleAbstract
Popularity of electric vehicle (EV) is growing very rapidly in recent times due to favourable emission regulations and its improved practicality in terms of the battery technology. Because of that, studying the rechargeable battery technologies becomes increasingly crucial. Therefore, this paper describes the work carried out to design a rechargeable battery system that integrate parameters monitoring system. The battery system was designed to be implemented in a small-scale EV that uses 10 kW electric motor. Lithium-ion battery was used in the system due to its relatively high energy capacity and charging cycles. For the monitoring system, three sensors where used; voltage sensor, current sensor and thermocouple, to measure the voltage, current and temperature, respectively. As a result, the battery’s performance and conditions can be monitored during operation.
References
Zwicker, M., Moghadam, M., Zhang, W., & Nielsen, C. 2020. Automotive battery pack manufacturing – a review of battery to tab joining. Journal of Advanced Joining Processes. 1: 100017.
Bisschop, R., Willstrand, O., Amon, F., & Rosengren, M. 2019. Fire Safety of Lithium-ion Batteries in Road Vehicles. RISE Research Institute of Sweden.
Thermal characteristics of a lithium-ion battery used in a hybrid electric vehicle under various driving cycles. 2020. IET Electrical Systems in Transportation. 10, 3: 243-248.
Omariba, Z. B., Zhang, L., Kang, H., & Sun, D. 2020. Parameter Identification and State Estimation of Lithium-Ion Batteries for Electric Vehicles with Vibration and Temperature Dynamics. World Electric Vehicle Journal, 11, 3: 50.
Jiang, J., & Zhang, C. 2015. Fundamentals and Applications of Lithium-ion Batteries in Electric Drive Vehicles (1st ed.). Wiley.
Downloads
Published
How to Cite
Issue
Section
License
Copyright of articles that appear in Journal of Transpot System Engineering (JTSE) belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions or any other reproductions of similar nature.
Disclaimer: The views and opinions expressed in the articles are those of the authors and do not necessarily reflect the official policy or position of the JTSE. Examples of analysis performed within are only examples and they should not be utilized in real-world. Assumptions made within the analysis are not reflective of the position of any JTSE entities.
