VOLTAGE AND FREQUENCY CONTROL OF AN ASYNCHRONOUS GENERATOR FOR A STAND-ALONE WIND ENERGY CONVERSION SYSTEM

Authors

  • M. Rajamaran
  • R. Balaji

Abstract

This paper proposes the voltage and frequency control for standalone wind energy conversion system, driven by isolated asynchronous generator with voltage source converter and battery energy storage system. The controller is a combination of voltage source converter made up of insulated gate bipolar junction transistor and battery storage system at the dc-link. Bidirectional active and reactive power flow capability of the controller function to ensure the voltage and frequency control of the system during variation in consumer load and wind turbine speed. The proposed system has been tested through MATLAB using Simulink. Keywords : Voltage source converter; battery energy storage system; isolated asynchronous generator

Downloads

Published

2016-12-01

How to Cite

Rajamaran, M., & Balaji, R. (2016). VOLTAGE AND FREQUENCY CONTROL OF AN ASYNCHRONOUS GENERATOR FOR A STAND-ALONE WIND ENERGY CONVERSION SYSTEM. Journal of Transport System Engineering, 1, 20–25. Retrieved from https://jtse.utm.my/index.php/jtse/article/view/79

Issue

Vol 3, No 1 (2016): Volume 3 Issue 1 (December)

Section

Transport System Engineering

License

Copyright of articles that appear in Journal of Transpot System Engineering (JTSE) belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions or any other reproductions of similar nature.

Disclaimer: The views and opinions expressed in the articles are those of the authors and do not necessarily reflect the official policy or position of the JTSE. Examples of analysis performed within are only examples and they should not be utilized in real-world. Assumptions made within the analysis are not reflective of the position of any JTSE entities.

Most read articles by the same author(s)