Simulation Study On Regenerative Braking System In Electric Vehicle (EV)
DOI:
https://doi.org/10.11113/jtse.v11.208Keywords:
Regenerative Braking, Electric Vehicles, Energy Return, State of Charge, MATLAB SimulinkAbstract
The acceptance of electric vehicles (EVs) is rapidly growing in today's era, driven by the imperative to curtail carbon emissions and embrace environmentally friendly alternatives. Consequently, profound significance is attached to researching energy regeneration systems within EVs. This paper focuses on a simulation study involving an integrated electric vehicle (EV) model and a regenerative braking system (RBS). The EV model was meticulously crafted using MATLAB Simulink to investigate the impact of the RBS on recharging the battery with recaptured energy. Furthermore, the study delved into comprehending how the size and weight factors influence the RBS performance. The study leveraged a 72 V Lithium-ion battery model, valued for its substantial capacity and charging efficiency. Employing Simulink's driving cycle sources, the simulation accurately mirrored real-world scenarios. The pivotal parameters scrutinized in this simulation encompassed the magnitude of current replenishing the battery and the battery's State of Charge (SOC) percentage. The results of this study showed that a good design for electric vehicles, focused on putting more energy back into the battery, needs to be heavier, more aerodynamic, and have a smaller front end.
References
Zhang, Y., Wang, W., Yang, C., Han, L., Zhang, Z., & Liu, J. (2019b). An effective regenerative braking strategy based on the combination algorithm of particle swarm optimization and ant colony optimization for electrical vehicle. International Symposium on Industrial Electronics. https://doi.org/10.1109/isie.2019.8781183
Liu, J., Su, Z., & Chen, J. (2018). Comparison of two electric braking methods with regenerative capability of brushless DC machine and their four-quadrant operation. Youth Academic Annual Conference of Chinese Association of Automation. https://doi.org/10.1109/yac.2018.8406538
Guneser, M. T., & Othman, A. R. (2021, September). Enhancement of Regenerative Power Utilization for Electric Vehicle by Using Eddy Current Brake. In 2021 International Aegean Conference on Electrical Machines and Power Electronics (ACEMP) & 2021 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM) (pp. 254-258). IEEE
Hinov, N., Vacheva, G., & Gilev, B. (2020, June). Mathematical Model for Determination of Energy Cycles in EVs. In 2020 24th International Conference Electronics (pp. 1-5). IEEE
MATLAB Helper ®. (2021, January 7). Electric Vehicle Simulation in Simulink | @MATLABHelperBlog [Video].YouTube. https://www.youtube.com/watch?v=ih0UyVc6sJA
Zhen, S., Shuo, L. X., & Yantao, T. (2018). Intelligent Vehicle’s Driver Model Considering Longitudinal and Lateral Integrated Control. IEEE Conference Proceedings, 2018, 1251–1256. https://jglobal.jst.go.jp/en/detail?JGLOBAL_ID=201802279145177906
Ahn, J. K., Jung, K. H., Kim, D. H., Jin, H. B., Kim, H. S., & Hwang, S. H. (2009). Analysis of a regenerative braking system for Hybrid Electric Vehicles using an Electro-Mechanical Brake. International Journal of Automotive Technology, 10(2), 229–234. https://doi.org/10.1007/s12239-009-0027-z
![](https://jtse.utm.my/public/journals/1/submission_208_295_coverImage_en_US.png)
Published
How to Cite
Issue
Section
License
Copyright of articles that appear in Journal of Transpot System Engineering (JTSE) belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions or any other reproductions of similar nature.
Disclaimer: The views and opinions expressed in the articles are those of the authors and do not necessarily reflect the official policy or position of the JTSE. Examples of analysis performed within are only examples and they should not be utilized in real-world. Assumptions made within the analysis are not reflective of the position of any JTSE entities.