New Battery Model Integrating the Internal Resistance  As a Function of Temperature

Zainab Asus; Zul hilmi Che Daud; Muhammad Hafiz Alwi; Izhari Izmi Mazali

New Battery Model Integrating the Internal Resistance As a Function of Temperature

Authors

Zainab Asus School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
Zul hilmi Che Daud School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
Muhammad Hafiz Alwi School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
Izhari Izmi Mazali School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia

Keywords:

Lithium-ion Battery, Battery Model, Effect of Temperature.

Abstract

A battery model is constructed to predict the behavior of a real battery under various operating conditions. This is done by considering the basic variable of the battery such as its operating temperature, discharging or charging current, battery cycle number and battery life time to simulate the output of the battery terminal. The main focus is to introduce the internal resistance as a function of temperature to the model. The simulation result is compared to the result from experimental, in term of the terminal voltage. The simulation result is then presented alongside the experimental result for manifesting that the model is effective and operational.

References

L. Guzzella and A. Sciarretta. Vehicle Propulsion systems (Introduction to Modelling and Optimization). Springer, New York, second edition edition, 2007.

S. Chacko and Y. M. Chung. Thermal modelling of li-ion polymer battery for electric vehicle drive cycles. Journal of Power Sources, 213:296–303, 2012.

M. Chen and G. A. R. Mora. Accurate electrical battery model capable of predicting runtime and I-V performance, IEEE Transactions on Energy Conversion, vol. 21, pp. 504-511, 2006.

O. Erdinc , B. Vural & M. Uzunoglu. A dynamic lithium-ion battery model considering the effects of temperature and capacity fading, IEEE Transactions on Components and Packaging Technologies: 384-386, 2009.

L. Gao, S. Liu and R. A. Dougal. Dynamic Lithium-Ion Battery Model for System Simulation, IEEE Transactions on Components and Packaging Technologies, vol. 25 , pp. 495-505, 2002.

Che Daud, Z. H., Chrenko, D., Dos Santos, F., Aglzim, E. -H., Keromnes, A., and Le Moyne, L. 3D electro-thermal modelling and experimental validation of lithium polymer-based batteries for automotive applications. Int. J. Energy Res., 40: 1144–1154. 2016.

D.Mori & K.Hirose. Recent challenges of hydrogen storage technologies for fuel cell vehicles. International Journal of Hydrogen Energy Vol 34, Issue 10, May 2009, Pages 4569-4574

Downloads

Published

2018-11-26

How to Cite

Asus, Z., Che Daud, Z. hilmi, Alwi, M. H., & Mazali, I. I. (2018). New Battery Model Integrating the Internal Resistance As a Function of Temperature. Journal of Transport System Engineering, 5(1). Retrieved from https://jtse.utm.my/index.php/jtse/article/view/92

Download Citation

Issue

Vol. 5 No. 1 (2018): Volume 5 Issue 1 (December)

Section

Transport System Engineering

License

Copyright of articles that appear in Journal of Transpot System Engineering (JTSE) belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions or any other reproductions of similar nature.

Disclaimer: The views and opinions expressed in the articles are those of the authors and do not necessarily reflect the official policy or position of the JTSE. Examples of analysis performed within are only examples and they should not be utilized in real-world. Assumptions made within the analysis are not reflective of the position of any JTSE entities.

Most read articles by the same author(s)

Zul Hilmi Che Daud, Fakhruddin Mohd Hassan, Dr. Zainab Binti Asus, Dr. Izhari Izmi Bin Mazali, Dr. Mohd Ibthisham Bin Ardani, Dr. Mohd Kameil Bin Abdul Hamid, Simulation Battery Cooling System for Small Scale Electric Vehicle (Light EV) , Journal of Transport System Engineering: Vol 8, No 2 (2021): Volume 8 Issue 2 (December)
Zainab Asus, Ahmad Zaki Abdillah, Dr Zul-hilmi Bin Che Daud, Dynamic Simulation Model of a Hybrid Electric ATV , Journal of Transport System Engineering: Vol 8, No 2 (2021): Volume 8 Issue 2 (December)
Zainab Asus, MOHAMMED AMIR AB RAHMAN, Zul-hilmi Bin Che Daud, Portable and Compact Tire-Clamping Mechanism for Medium Sized Tire , Journal of Transport System Engineering: Vol 8, No 1 (2021): Volume 8 Issue 1 (June)
Izhari Izmi Mazali, Izzat Asyraf Sakri Roslan, Dr. Zul-hilmi Bin Che Daud, Dr. Mohd Kameil Bin Abdul Hamid, Mohd Salman Che Kob, Dr. Zainab Binti Asus, RECHARGEABLE BATTERY SYSTEM FOR SMALL SCALE ELECTRIC VEHICLE , Journal of Transport System Engineering: Vol 8, No 2 (2021): Volume 8 Issue 2 (December)
Aizat Farhan Azzuwan, Izhari Izmi Mazali, DEVELOPMENT OF TEST RIG FOR CLAMPING FORCE SYSTEM OF ELECTRO-MECHANICAL CVT , Journal of Transport System Engineering: Vol 6, No 1 (2019): Volume 6 Issue 1 (December)
Zulhusni Ismail, Zainab Asus, Parallel Hybrid Electric Vehicle Simulation Model Using Energetic Macroscopic Representation Method , Journal of Transport System Engineering: Vol. 5 No. 1 (2018): Volume 5 Issue 1 (December)
Izhari Izmi Mazali, Nurulakmar Abu Husain, Mohd Salman Che Kob, Zulhilmi Che Daud, Zainab Asus, CLAMPING FORCE ADJUSTMENT SYSTEM FOR A CONTINUOUSLY VARIABLE TRANSMISSION , Journal of Transport System Engineering: Vol. 5 No. 1 (2018): Volume 5 Issue 1 (December)
A. Fahruddin, Zul Hilmi Che Daud, Zainab Asus, Izhari Izmi Mazali, EXPERIMENTAL STUDY OF BATTERY TEMPERATURE UNDER CONSTANT DISCHARGE RATE , Journal of Transport System Engineering: Vol 10, No 1 (2023): Volume 10 Issue 1 (June)
Zainab Asus, Beh Jian Xiang, Zul Hilmi Che Daud, OPTIMISATION OF HYBRID ELECTRIC VEHICLE ENERGY MANAGEMENT USING MACHINE LEARNING , Journal of Transport System Engineering: Vol 10, No 2 (2023): Volume 10 Issue 2 (December)
Quek James Long Jie, Zul Hilmi Che Daud, DEVELOPMENT BATTERY PACK FOR ELECTRIC ATV USING 40AH POUCH BATTERY CELLS , Journal of Transport System Engineering: Vol 10, No 2 (2023): Volume 10 Issue 2 (December)