STRESS CONCENTRATION FACTOR OF NOTCHED HYBRID RECYCLED CARBON COMPOSITE

Authors

  • M. I. Naufal 1. Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor, Malaysia
  • C. C. Yeu 2. Smart Manufacturing and Systems Research Group, University of Southampton Malaysia, 79100 Iskandar Puteri, Johor, Malaysia
  • K. W. Gan 2. Smart Manufacturing and Systems Research Group, University of Southampton Malaysia, 79100 Iskandar Puteri, Johor, Malaysia
  • Haris Ahmad Israr Ahmad Universiti Teknologi Malaysia
  • A. F. Nejad 1. Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor, Malaysia
  • K. J. Wong 3. Faculty of Engineering and Science, Curtin University Malaysia, 98000 Miri, Sarawak, Malaysia

DOI:

https://doi.org/10.11113/jtse.v11.221

Keywords:

Recycled Carbon Fiber; Stress Concentration Factor; Digital Image Correlation, Notched Composite

Abstract

Recycled carbon fiber (r-CF) holds significant promise for reducing both production waste and costs associated with its manufacturing, which is characterized by high energy intensity. However, its full potential remains untapped due to limited understanding of its mechanical behavior, particularly concerning stress concentration factors in notched recycled carbon fiber-reinforced polymer (r-CFRP). This study is dedicated to investigating the mechanical properties of r-CFRP and characterizing the tensile behavior of notched composites. Additionally, it explores new functionalities of r-CF and introduces a methodology for correlating strain fields obtained from digital image correlation (DIC) with stress concentration factors (SCF). Three types of composite materials—glass fiber-reinforced polymer (GFRP), r-CFRP, and hybrid GFRP/r-CFRP—are included in this research, encompassing both unnotched and notched composites subjected to tensile tests. DIC was chosen as the strain field measurement technique for its enhanced accuracy and speed compared to conventional methods such as strain gauges. The analysis revealed that GFRP exhibits the highest Young's Modulus (E) at 19.64 ± 0.72 MPa, followed by hybrid GFRP/r-CFRP at 15.22 ± 0.99 MPa and r-CFRP at 12.97 ± 0.48 MPa. For notched composites, this study analyzed SCF and strength retention for each material. r-CFRP exhibits the highest SCF at 1.57 and the lowest strength retention at 63.70%, signifying its high notch sensitivity. However, the incorporation of r-CFRP in hybridization with GFRP enhances the SCF to 1.46 and increase the strength retention to 81.02%, which was the highest among the three laminates. These results demonstrate that r-CFRP has the potential to mitigate stress concentration, making it an ideal material for producing notch-insensitive hybrid glass fiber composites.

Author Biography

Haris Ahmad Israr Ahmad, Universiti Teknologi Malaysia

SENIOR LECTURER

DEPARTMENT OF AERONAUTICS, AUTOMOTIVE AND OCEAN ENGINEERING

References

‘Bandwidth Study on Energy Use and Potential Energy Saving Opportunities in the Manufacturing of Lightweight Materials: Carbon Fiber Reinforced Polymer Composites’, 2016.

S. Das, ‘Life cycle assessment of carbon fiber-reinforced polymer composites’, International Journal of Life Cycle Assessment, vol. 16, no. 3, pp. 268–282, Mar. 2011, doi: 10.1007/s11367-011-0264-z.

S. Karuppannan Gopalraj and T. Kärki, ‘A review on the recycling of waste carbon fibre/glass fibre-reinforced composites: fibre recovery, properties and life-cycle analysis’, SN Applied Sciences, vol. 2, no. 3. Springer Nature, Mar. 01, 2020. doi: 10.1007/s42452-020-2195-4.

H. Sukanto, W. W. Raharjo, D. Ariawan, and J. Triyono, ‘Carbon fibers recovery from CFRP recycling process and their usage: A review’, IOP Conf Ser Mater Sci Eng, vol. 1034, no. 1, p. 012087, Feb. 2021, doi: 10.1088/1757-899x/1034/1/012087.

M. Mohamed Makki and B. Chokri, ‘Experimental, analytical, and finite element study of stress concentration factors for composite materials’, J Compos Mater, vol. 51, no. 11, pp. 1583–1594, May 2017, doi: 10.1177/0021998316659915.

L. Toubal, M. Karama, and B. Lorrain, ‘Stress concentration in a circular hole in composite plate’, Compos Struct, vol. 68, no. 1, pp. 31–36, Apr. 2005, doi: 10.1016/j.compstruct.2004.02.016.

Downloads

Published

2024-05-30

How to Cite

Naufal, M. I., Yeu , C. C., Gan, K. W., Israr Ahmad, H. A., Nejad, A. F., & Wong, K. J. (2024). STRESS CONCENTRATION FACTOR OF NOTCHED HYBRID RECYCLED CARBON COMPOSITE. Journal of Transport System Engineering, 11(1), 29–34. https://doi.org/10.11113/jtse.v11.221

Issue

Section

Transport System Engineering

Similar Articles

<< < 1 2 3 > >> 

You may also start an advanced similarity search for this article.