A BIBLIOMETRIC ANALYSIS OF FATTY ACID METHYL ESTER (FAME) TRIBOLOGY (2010 TO 2019)

Authors

  • Chiew Tin Lee Faculty of Mechanical Engineering, Universiti Teknologi Malaysia (UTM), 81310 Johor Bahru, Johor, MALAYSIA
  • Kimberly Ming-Xia Foo Faculty of Mechanical Engineering, Universiti Teknologi Malaysia (UTM), 81310 Johor Bahru, Johor, MALAYSIA
  • Mei Bao Lee Faculty of Mechanical Engineering, Universiti Teknologi Malaysia (UTM), 81310 Johor Bahru, Johor, MALAYSIA
  • Guo Ren Mong School of Energy and Chemical Engineering, Xiamen University Malaysia, Jalan Sunsuria, Bandar Sunsuria, 43900 Sepang, Selangor, MALAYSIA

DOI:

https://doi.org/10.11113/jtse.v10.200

Keywords:

Bibliometric analysis, Oxidation stability, FAME

Abstract

In the present study, a bibliometric analysis has been carried out with relation to the FAME research topic on its production, rheological and tribological studies for the last ten years (2010-2019). The scientific collaborations throughout this timespan were investigated according to different parameters in Web of Science (WoS). Based on the keyword search string, the top productive journals for the FAME research and their co-citation relationships were revealed in this study. Energy Fuels, Fuel and Wear are indicated to be the top three most influential journals of this research topic. Apart from that, the top productive countries, organizations, authors, funding agencies and their respective visualization networks were also investigated. A keyword co-occurrence analysis was conducted to reveal thematic areas in FAME research. A strong research interest in FAME oxidation stability and its tribological behaviour was one of the main findings of this analysis. FAME as biolubricant is recommended due to their ability to reduce wear and friction, also by adding a proper amount of additives, the poor oxidative stability characteristic of FAME could be resolved. These findings are expected to encourage more FAME-related research and communications in this field.

Author Biographies

Kimberly Ming-Xia Foo, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia (UTM), 81310 Johor Bahru, Johor, MALAYSIA

 

 

Mei Bao Lee, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia (UTM), 81310 Johor Bahru, Johor, MALAYSIA

 

 

Guo Ren Mong , School of Energy and Chemical Engineering, Xiamen University Malaysia, Jalan Sunsuria, Bandar Sunsuria, 43900 Sepang, Selangor, MALAYSIA

 

 

References

Bartz, W. J., 2006. Ecotribology: environmentally acceptable tribological practices. Tribology International. 39(8): 728-733.

Holmberg, K., Erdemir, A., 2017. Influence of tribology on global energy consumption, costs and emissions. Friction. 5: 263-284.

Nosonovsky, M., Bhushan, B., 2010. Green tribology: principles, research areas and challenges. 368(1929): 4677-4694.

Jost, H., 2009. Green tribology—A footprint where economies and environment meet. Address to the 4th World Tribology Congress.

Zhang, M., Gao, Z., Zheng, T., Ma, Y., Wang, Q., Gao, M., Sun, X., 2018. A bibliometric analysis of biodiesel research during 1991–2015. Journal of Material Cycles and Waste Management. 20: 10-18.

Yaoyang, X., Boeing, W. J., 2013. Mapping biofuel field: a bibliometric evaluation of research output. Renewable and Sustainable Energy Reviews. 28: 82-91.

Hirsch, J. E., 2005. An index to quantify an individual's scientific research output. Proceedings of the National academy of Sciences. 102(46): 16569-16572.

Graboski, M. S., McCormick, R. L., 1998. Combustion of fat and vegetable oil derived fuels in diesel engines. Progress in energy and combustion science. 24(2): 125-164.

Moser, B. R., Vaughn, S. F., 2010. Evaluation of alkyl esters from Camelina sativa oil as biodiesel and as blend components in ultra low-sulfur diesel fuel. Bioresource technology. 101(2): 646-653.

Sulek, M., Kulczycki, A., Malysa, A., 2010. Assessment of lubricity of compositions of fuel oil with biocomponents derived from rape-seed. Wear. 268(1-2): 104-108.

Berman, P., Nizri, S., Wiesman, Z., 2011. Castor oil biodiesel and its blends as alternative fuel. biomass and bioenergy. 35(7): 2861-2866.

Anwar, F., Rashid, U., Ashraf, M., Nadeem, M., 2010. Okra (Hibiscus esculentus) seed oil for biodiesel production. Applied Energy. 87(3): 779-785.

Rashid, U., Anwar, F., Ashraf, M., Saleem, M., Yusup, S., 2011. Application of response surface methodology for optimizing transesterification of Moringa oleifera oil: Biodiesel production. Energy conversion and Management. 52(8-9): 3034-3042.

Kumar, N., 2017. Oxidative stability of biodiesel: Causes, effects and prevention. Fuel. 190: 328-350.

Canoira, L., Galeán, J. G., Alcántara, R., Lapuerta, M., García-Contreras, R., 2010. Fatty acid methyl esters (FAMEs) from castor oil: Production process assessment and synergistic effects in its properties. Renewable Energy. 35(1): 208-217.

Moser, B. R., Vaughn, S. F., 2010. Coriander seed oil methyl esters as biodiesel fuel: unique fatty acid composition and excellent oxidative stability. Biomass and bioenergy. 34(4): 550-558.

Moser, B. R., 2012. Preparation of fatty acid methyl esters from hazelnut, high-oleic peanut and walnut oils and evaluation as biodiesel. Fuel. 92(1): 231-238.

Sundus, F., Fazal, M., Masjuki, H., 2017. Tribology with biodiesel: A study on enhancing biodiesel stability and its fuel properties. Renewable and Sustainable Energy Reviews. 70: 399-412.

Salih, N., Salimon, J., Yousif, E., Abdullah, B. M., 2013. Biolubricant basestocks from chemically modified plant oils: ricinoleic acid based-tetraesters. Chemistry Central Journal. 7(1): 1-13.

Zulkifli, N. W. M., Azman, S., Kalam, M., Masjuki, H. H., Yunus, R., Gulzar, M., 2016. Lubricity of bio-based lubricant derived from different chemically modified fatty acid methyl ester. Tribology International. 93: 555-562.

Chong, W., Ng, J.-H., 2016. An atomic-scale approach for biodiesel boundary lubricity characterisation. International Biodeterioration & Biodegradation. 113: 34-43.

Hamdan, S., Chong, W., Ng, J.-H., Ghazali, M., Wood, R., 2017. Influence of fatty acid methyl ester composition on tribological properties of vegetable oils and duck fat derived biodiesel. Tribology International. 113: 76-82.

Syahrullail, S., Kamitani, S., Shakirin, A., 2013. Performance of vegetable oil as lubricant in extreme pressure condition. Procedia Engineering. 68: 172-177.

Hoekman, S. K., Broch, A., Robbins, C., Ceniceros, E., Natarajan, M., 2012. Review of biodiesel composition, properties, and specifications. Renewable and sustainable energy reviews. 16(1): 143-169.

Koberg, M., Gedanken, A., 2013. New and Future Developments in Catalysis: Chapter 9. Using Microwave Radiation and SrO as a Catalyst for the Complete Conversion of Oils, Cooked Oils, and Microalgae to Biodiesel, Elsevier Inc. Chapters.

Arumugam, S., Sriram, G., 2012. Effect of bio-lubricant and biodiesel-contaminated lubricant on tribological behavior of cylinder liner–piston ring combination. Tribology Transactions. 55(4): 438-445.

Serrano, M., Martínez, M., Aracil, J., 2013. Long term storage stability of biodiesel: Influence of feedstock, commercial additives and purification step. Fuel Processing Technology. 116: 135-141.

El Boulifi, N., Bouaid, A., Martinez, M., Aracil, J., 2013. Optimization and oxidative stability of biodiesel production from rice bran oil. Renewable Energy. 53: 141-147.

Downloads

Published

2023-10-30

How to Cite

Lee, C. T., Foo, K. M.-X., Lee, M. B., & Mong , G. R. (2023). A BIBLIOMETRIC ANALYSIS OF FATTY ACID METHYL ESTER (FAME) TRIBOLOGY (2010 TO 2019). Journal of Transport System Engineering, 10(2), 46–59. https://doi.org/10.11113/jtse.v10.200

Issue

Section

Transport System Engineering

Similar Articles

1 2 3 4 5 > >> 

You may also start an advanced similarity search for this article.