Investigating the Influence of Protic Ionic Liquid on the Triboelectrical Properties of Trimethylolpropane Trioleate (TMPO)

Authors

  • Nur Aisya Affrina Mohamed Ariffin Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • Sze Yun Yeoh Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
  • Siti Hartini Hamdan Malaysian Institute of Chemical and Bioengineering Technology (MICET), Universiti Kuala Lumpur, 78000 Alor Gajah, Melaka, Malaysia
  • Chiew Tin Lee Faculty of Engineering, Universiti Malaysia Sarawak (UNIMAS), Kota Samarahan 94300, Sarawak, Malaysia

DOI:

https://doi.org/10.11113/jtse.v11.235

Keywords:

Protic Ionic Liquid; Trimethylolpropane Trioleate; Vegetable Oil; Wear Characteristics; Triboelectric; Tribology; Mechanical; Friction

Abstract

 

Under triboelectric conditions, where tribocharging accelerates lubrication failure, lubricants with enhanced electrical properties are essential. Trimethylolpropane Trioleate (TMPO) oil, derived from esters that possess good lubricating properties and wear performance but is lacking in terms of electrical properties which can be further improved when blended with Ionic Liquid. This study blends 1 – 5 wt% of Protic Ionic Liquid (PIL) into TMPO and evaluate the frictional and wear performances of the blends under 1 – 2 A current conditions to understand the behaviour towards the tribological properties of different blends of material. Electric currents ranging around 1 – 2 A are implemented to the custom-designed ball-on-disc tribometer, with a constant 4.5 V voltage supply and the static resistance are measured. Mechanical wear properties are observed after the tribological test with different samples. The frictional properties of all concentrations of PIL in TMPO showed significant frictional improvements with 1%wt PIL showed 53% better results indicating improvements in frictional properties and wear performance under 2A current conditions, owing to its lowest film resistivity of 0.14 mΩ.

References

Mannekote, J. K., Kailas, S. V., Venkatesh, K., & Kathyayini, N. (2018). Environmentally friendly functional fluids from renewable and sustainable sources review. Renewable & Sustainable Energy Reviews, 81, 1787–1801. https://doi.org/10.1016/j.rser.2017.05.274

Qu J, Truhan JJ, Dai S, Luo H, Blau PJ. Ionic liquids with ammonium cations as lubricants or additives. Tribology Letters 2006;22:207–14.

Qu J, Blau P, Dai S, Luo H, Meyer III HM. Ionic liquids as novel lubricants and additives for diesel engine applications. Tribology Letters 2009;35: 181–9.

Qu J, Blau P, Dai S, Luo H, Meyer III HM, Truhan JJ. Tribological characteristics of aluminium alloys sliding against steel lubricated by ammonium and imidazolium liquids. Wear 2009;267:1226–31.

Xia Y, Sasaki S, Murakami T, Nakano M, Shi L, Wang H. Ionic liquid lubrication of electrodeposited nickel–Si3N4 composite coatings. Wear 2007;262:765–71.

Sangoro, J., Iacob, C., Serghei, A., Naumov, S., Galvosas, P., Kärger, J., Wespe, C., Bordusa, F., Stoppa, A., Hunger, J., Buchner, R., & Kremer, F. (2008). Electrical conductivity and translational diffusion in the 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid. Journal of Chemical Physics Online/˜the œJournal of Chemical Physics/Journal of Chemical Physics, 128(21). https://doi.org/10.1063/1.2921796

Komvopoulos, K., Do, V., Yamaguchi, E. S., & Ryason, P. R. (2003). Effect of Sulfur- and Phosphorus-Containing Additives and Metal Deactivator on the Tribological Properties of Boundary-Lubricated Steel Surfaces. Tribology Transactions, 46(3), 315–325. https://doi.org/10.1080/10402000308982632

Palacio, M. L. B., & Bhushan, B. (2010). A review of ionic liquids for Green molecular lubrication in Nanotechnology. Tribology Letters, 40(2), 247–268. https://doi.org/10.1007/s11249-010-9671-8

Greaves, T. L., & Drummond, C. J. (2007). Protic ionic liquids: Properties and applications. Chemical Reviews, 108(1), 206–237. https://doi.org/10.1021/cr068040u

Rogers, R. D., & Voth, G. A. (2007). Ionic liquids. Accounts of Chemical Research, 40(11), 1077–1078. https://doi.org/10.1021/ar700221n

Angell, C. A., Byrne, N., & Bélières, J. (2007). Parallel developments in Aprotic and Protic ionic liquids: physical chemistry and applications. Accounts of Chemical Research, 40(11), 1228–1236. https://doi.org/10.1021/ar7001842

Gul, M., Zulkifli, N. W. M., Masjuki, H., Kalam, M., Mujtaba, M., Harith, M. H., Syahir, A. Z., Ahmed, W., & Farooq, A. (2020). Effect of TMP-based-cottonseed oil-biolubricant blends on tribological behavior of cylinder liner-piston ring combinations. Fuel, 278, 118242. https://doi.org/10.1016/j.fuel.2020.118242

TRIMETHYLPROPANE TRIOLEATE. (n.d.). https://www.wilmar-international.com/oleochemicals/products/home-care/detail/trimethylpropane-trioleate

Kenneth Holmberg, Peter Andersson, Ali Erdemir, Global energy consumption due to friction in passenger cars, Tribology International, Volume 47, 2012,Pages 221-234, ISSN 0301-679X, https://doi.org/10.1016/j.triboint.2011.11.022.

Shah, R., Tung, S., Chen, R., & Miller, R. (2021). Grease performance requirements and future perspectives for electric and hybrid vehicle applications. Lubricants, 9(4), 40.

Spikes, H. A. (2020). Triboelectrochemistry: Influence of applied electrical potentials on friction and wear of lubricated contacts. Tribology Letters, 68, 1-27.

Liu, X., Zhang, J., Zhang, L., Feng, Y., Feng, M., Luo, N., & Wang, D. (2022). Influence of interface liquid lubrication on triboelectrification of point contact friction pair. Tribology International, 165, 107323. https://doi.org/10.1016/j.triboint.2021.107323

Liao, Y.; Hao, X.; An, M.; Yang, Z.; Ma, L.; Ren, H. Enhancing low-rank coal flotation using mixed collector of dodecane and oleic acid: Effect of droplet dispersion and its interaction with coal particle. Fuel 2020, 280, 118634.

Marino, F.; Lopez, E.R.; Arnosa, A.; Gómez, M.A.G.; Pineiro, Y.; Rivas, J.; Alvarez-Lorenzo, C.; Fernandez, J. ZnO nanoparticles coated with oleic acid as additives for a polyalphaolefin lubricant. J. Mol. Liquids 2022, 348, 118401.

Mohamed Ariffin, N. A. A., Foong, S. Y., Chong, W. W. F., Lam, S. S., Ng, J.-H., & Zhang, H. (2024). Ionic liquid lubricity enhancement with bio-oil derived from microwave pyrolysis of bamboo. Industrial Crops and Products, 214, 118543. https://doi.org/10.1016/j.indcrop.2024.118543

Lee, C. T., Lee, M. B., Hamdan, S. H., Chong, W. W. F., Chong, C. T., Zhang, H., & Chen, A. W. L. (2022). Trimethylolpropane trioleate as eco-friendly lubricant additive. Engineering Science and Technology, an International Journal, 35. https://doi.org/10.1016/j.jestch.2021.09.014

Mohamed Ariffin, N. A. A., Lee, C. T., Thirugnanasambandam, A., Wong, K. J., & Chong, W. W. F. (2024). Triboelectric Performance of Ionic Liquid, Synthetic, and Vegetable Oil-Based Polytetrafluoroethylene (PTFE) Greases. Lubricants, 12(8), 272. https://doi.org/10.3390/lubricants12080272

Liu, M., Ni, J., Zhang, C., Wang, R., Cheng, Q., Liang, W., & Liu, Z. (2024). The Application of Ionic Liquids in the Lubrication Field: Their Design, Mechanisms, and Behaviors. In Lubricants (Vol. 12, Issue 1). Multidisciplinary Digital Publishing Institute (MDPI). https://doi.org/10.3390/lubricants12010024

Fry, B.M., Chui, M. Y., Moody, G., and Wong, J. S. S., “Interactions between organic friction modifier additives,” Tribol Int, vol. 151, Nov. 2020, doi: 10.1016/j.triboint.2020.106438.

Published

2024-10-02

How to Cite

Mohamed Ariffin, N. A. A., Yeoh, S. Y., Hamdan, S. H., & Lee, C. T. (2024). Investigating the Influence of Protic Ionic Liquid on the Triboelectrical Properties of Trimethylolpropane Trioleate (TMPO). Journal of Transport System Engineering, 11(2). https://doi.org/10.11113/jtse.v11.235

Issue

Section

Transport System Engineering

Similar Articles

<< < 3 4 5 6 7 8 

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)