ASSESSING THE TRIBOLOGICAL PERFORMANCE OF POLYALPHAOLEFIN UNDER ELECTRICAL CURRENT CONDITIONS

Authors

  • Nur Aisya Affrina Mohamed Ariffin Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia.
  • William Woei Fong Chong Automotive Development Centre (ADC), Institute for Vehicle System & Engineering (IVeSE), Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia.

DOI:

https://doi.org/10.11113/jtse.v11.228

Keywords:

Polyalphaolefin; lubrication; aviation; electrification; electrical current

Abstract

Polyalphaolefin (PAO) lubricants have long been a staple in the aviation industry, prized for their exceptional friction-reduction properties in high-temperature environments. However, as the industry embraces electrification to decarbonise passenger planes, the demand for suitable lubricants to accommodate the extreme working conditions of electric motors has surged. Understanding how these lubricants perform under electrical conditions becomes crucial, particularly by delving into the frictional characteristics when exposed to electrical current. This study explores the frictional behaviour of PAO4, a specific type of PAO lubricant when subjected to electrical working conditions. It is to conclude that the frictional performance of PAO4 decreases subject to electrical current discharge, with the friction increasing around 30% with an additional temperature increment of 15%. Thus, the investigation aims to understand the interplay between friction and electrical current within the evolving aviation industry.

References

P. M. Lugt, ‘Modern advancements in lubricating grease technology’, Tribol Int, vol. 97, pp. 467–477, May 2016, doi: 10.1016/j.triboint.2016.01.045.

R. Uppar, P. Dinesha, and S. Kumar, ‘A critical review on vegetable oil-based bio-lubricants: preparation, characterization, and challenges’, Environment, Development and Sustainability, vol. 25, no. 9. Springer Science and Business Media B.V., pp. 9011–9046, Sep. 01, 2023. doi: 10.1007/s10668-022-02669-w.

S. C. Tung and M. L. McMillan, ‘Automotive tribology overview of current advances and challenges for the future’, Tribol Int, vol. 37, no. 7, pp. 517–536, 2004, doi: 10.1016/j.triboint.2004.01.013.

Y. Singh, A. Farooq, A. Raza, M. A. Mahmood, and S. Jain, ‘Sustainability of a non-edible vegetable oil based bio-lubricant for automotive applications: A review’, Process Safety and Environmental Protection, vol. 111. Institution of Chemical Engineers, pp. 701–713, 2017. doi: 10.1016/j.psep.2017.08.041.

D. A. Law, J. R. Lohuis, J. Y. Breau, A. J. Harlow, and M. Rochette, ‘Development and Performance Advantages of Industrial, Automotive and Aviation Synthetic Lubricants’.

L. I. Kioupis and E. J. Maginn, ‘Molecular Simulation of Poly-α-olefin Synthetic Lubricants: Impact of Molecular Architecture on Performance Properties’, Journal of Physical Chemistry B, vol. 103, no. 49, pp. 10781–10790, Dec. 1999, doi: 10.1021/jp992399n.

N. Wu, Z. Zong, Y. Fei, J. Ma, and F. Guo, ‘Thermal Degradation of Aviation Synthetic Lubricating Base Oil’, Petroleum Chemistry, vol. 58, no. 3, pp. 250–257, Mar. 2018, doi: 10.1134/S0965544118030179.

Z. Gan, T. Yao, M. Zhang, J. Hu, X. Liao, and Y. Shen, ‘Effect of temperature on the composition of a synthetic hydrocarbon aviation lubricating oil’, Materials, vol. 13, no. 7, Apr. 2020, doi: 10.3390/ma13071606.

P. Nagendramma, S. Kaul, and R. P. S. Bisht, ‘Study of synthesised ecofriendly and biodegradable esters: fire resistance and lubricating properties’, Lubrication Science, vol. 22, no. 3, pp. 103–110, Mar. 2010, doi: 10.1002/ls.108.

K. Holmberg and A. Erdemir, ‘The impact of tribology on energy use and CO2 emission globally and in combustion engine and electric cars’, Tribol Int, vol. 135, pp. 389–396, Jul. 2019, doi: 10.1016/j.triboint.2019.03.024.

J. Liu et al., ‘Multi-scale urban passenger transportation CO2 emission calculation platform for smart mobility management’, Appl Energy, vol. 331, Feb. 2023, doi: 10.1016/j.apenergy.2022.120407.

I. Abrantes, A. F. Ferreira, A. Silva, and M. Costa, ‘Sustainable aviation fuels and imminent technologies - CO2 emissions evolution towards 2050’, J Clean Prod, vol. 313, Sep. 2021, doi: 10.1016/j.jclepro.2021.127937.

M. D. Staples, R. Malina, P. Suresh, J. I. Hileman, and S. R. H. Barrett, ‘Aviation CO2 emissions reductions from the use of alternative jet fuels’, Energy Policy, vol. 114, pp. 342–354, Mar. 2018, doi: 10.1016/j.enpol.2017.12.007.

K. Dennis, K. Colburn, and J. Lazar, ‘Environmentally beneficial electrification: The dawn of “emissions efficiency”’, Electricity Journal, vol. 29, no. 6, pp. 52–58, Jul. 2016, doi: 10.1016/j.tej.2016.07.007.

H. Ritchie, ‘Climate change and flying: what share of global CO2 emissions come from aviation?’ [Online]. Available: https://ourworldindata.org/co2-emissions-from-aviation?utm_source=hs_email&utm_medium=email&_hsenc=p2ANqtz--KelFpGeGVfVGPJ1Kgw_PWuKHgvA07-wJ6WPC9Aw78VMt-adNTUXJnG6po1GmA-xt0Gp8q#article-licence

A. Spaeth, ‘Are electric planes ready for takeoff?’ [Online]. Available: https://www.dw.com/en/are-electric-planes-ready-for-takeoff/a-64491147

A. Willwerth and M. Roman, ‘Electrical Bearing Damage — a Lurking Problem In Inverter-Driven Traction Motors’, in 2013 IEEE Transportation Electrification Conference and Expo (ITEC), 2013.

F. He, G. Xie, and J. Luo, ‘Electrical bearing failures in electric vehicles’, Friction, vol. 8, no. 1. Tsinghua University Press, pp. 4–28, Feb. 01, 2020. doi: 10.1007/s40544-019-0356-5.

B. Melka, J. Smolka, J. Hetmanczyk, and P. Lasek, ‘Numerical and experimental analysis of heat dissipation intensification from electric motor’, Energy, vol. 182, pp. 269–279, Sep. 2019, doi: 10.1016/j.energy.2019.06.023.

Z. Wang, T. W. Ching, S. Huang, H. Wang, and T. Xu, ‘Challenges Faced by Electric Vehicle Motors and Their Solutions’, IEEE Access, vol. 9, pp. 5228–5249, 2021, doi: 10.1109/ACCESS.2020.3045716.

S. Humbert, ‘Detection of electrical discharges in bearings’, 2008.

Y. Chen, S. Jha, A. Raut, W. Zhang, and H. Liang, ‘Performance Characteristics of Lubricants in Electric and Hybrid Vehicles: A Review of Current and Future Needs’, Front Mech Eng, vol. 6, p. na, Oct. 2020, doi: 10.3389/FMECH.2020.571464.

S. Gunderson, G. Fultz, C. E. Snyder, J. Wright, L. Gschwender, and S. Heidger, ‘The Effect of Water Content on the Dielectric Strength of Polyalphaolefin (PAO) Coolants’, 2011.

G. J. Hunt, M. P. Gahagan, and M. A. Peplow, ‘Wire resistance method for measuring the corrosion of copper by lubricating fluids’, Lubrication Science, vol. 29, no. 4, pp. 279–290, Jun. 2017, doi: 10.1002/ls.1368.

C. T. Lee, M. B. Lee, W. W. F. Chong, J. H. Ng, K. J. Wong, and C. T. Chong, ‘Boundary Lubricity of Vegetable-Oil-Derived Trimethylolpropane (TMP) Ester’, Lubricants, vol. 10, no. 12, Dec. 2022, doi: 10.3390/lubricants10120346.

Downloads

Published

2024-05-30

How to Cite

Mohamed Ariffin, N. A. A., & Chong, W. W. F. (2024). ASSESSING THE TRIBOLOGICAL PERFORMANCE OF POLYALPHAOLEFIN UNDER ELECTRICAL CURRENT CONDITIONS . Journal of Transport System Engineering, 11(1), 35–40. https://doi.org/10.11113/jtse.v11.228

Issue

Section

Transport System Engineering

Similar Articles

1 2 3 > >> 

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)